END MILL, 1.00MM DIA, 1.50MM CUT,CARBIDE
$71.90
Carbide End Mill, Grade General Purpose, List Number HP410, Square End Mill Style, Dimension Type Metric, Milling Dia. 1.00mm, Number of Flutes 2, Length of Cut 1.50mm, Spiral Cutting Type, Overall Length 60.00mm, Finish TiALN, End Mill Shank Type, Shank Dia. 6.00mm, Single End, Cutting Direction Right Hand, Helix Angle 30 Degrees , Neck Dia. 0.95mm, Neck Length 5.00mm, End Mill Application Roughing/Finishing
Description
Carbide End Mill, Grade General Purpose, List Number HP410, Square End Mill Style, Dimension Type Metric, Milling Dia. 1.00mm, Number of Flutes 2, Length of Cut 1.50mm, Spiral Cutting Type, Overall Length 60.00mm, Finish TiALN, End Mill Shank Type, Shank Dia. 6.00mm, Single End, Cutting Direction Right Hand, Helix Angle 30 Degrees , Neck Dia. 0.95mm, Neck Length 5.00mm, End Mill Application Roughing/Finishing
Specifications
| AbilityOne Item | No |
|---|---|
| Berry Amendment Item | No |
| Biopreferred Item | No |
| Brand | OSG |
| CPG Item | No |
| Country of Origin | US |
| DFE Item | No |
| DLC Item | No |
| EcoLogo | No |
| EnergyStar Item | No |
| FSC Item | No |
| GSA Approved | Yes |
| Green Product | No |
| Green Seal Certified | No |
| Hazmat | No |
| MPI Item | No |
| MPN | HP410-0394 |
|---|---|
| Minimum Quantity | 1 |
| NEMA | No |
| OMRI Item | No |
| Package Quantity | 1 |
| Post-consumer Recycled Content | 0.0% |
| Pre-consumer Recycled Content | 0.0% |
| Proposition 65 Warning | No |
| Quotable Product | No |
| SCS Item | No |
| Safer Choice | No |
| Total Recycled Content | 0.0% |
| UOM | Each |
| Watersense Item | No |
| Watts | No |
| Weight | 0.100000 |
Write Your Own Review