CORNER CHAMFER END MILL, 5/8" DIA, CARB.
$327.48
Corner Chamfer End Mill, Grade High Performance, List Number VG436, with Weldon Flat, End Mill Style Corner Chamfer, End Mill Material Carbide, Dimension Type Fractional Inch, Milling Diameter 5/8 In., Single End, Number of Flutes 4, Length of Cut 3/4 In., Center End Mill Cutting Type, Overall Length 3 In., Finish TiAlN, Shank Dia. 3/4 In., Cutting Direction Right Hand, Helix Angle 35 Degrees , End Mill Application Finishing
Description
Corner Chamfer End Mill, Grade High Performance, List Number VG436, with Weldon Flat, End Mill Style Corner Chamfer, End Mill Material Carbide, Dimension Type Fractional Inch, Milling Diameter 5/8 In., Single End, Number of Flutes 4, Length of Cut 3/4 In., Center End Mill Cutting Type, Overall Length 3 In., Finish TiAlN, Shank Dia. 3/4 In., Cutting Direction Right Hand, Helix Angle 35 Degrees , End Mill Application Finishing
Specifications
| AbilityOne Item | No |
|---|---|
| Berry Amendment Item | No |
| Biopreferred Item | No |
| Brand | OSG |
| CPG Item | No |
| Country of Origin | US |
| DFE Item | No |
| DLC Item | No |
| EcoLogo | No |
| EnergyStar Item | No |
| FSC Item | No |
| GSA Approved | Yes |
| Green Product | No |
| Green Seal Certified | No |
| Hazmat | No |
| MPI Item | No |
| MPN | VG436-6250 |
|---|---|
| Minimum Quantity | 1 |
| NEMA | No |
| OMRI Item | No |
| Package Quantity | 1 |
| Post-consumer Recycled Content | 0.0% |
| Pre-consumer Recycled Content | 0.0% |
| Proposition 65 Warning | No |
| Quotable Product | No |
| SCS Item | No |
| Safer Choice | No |
| Total Recycled Content | 0.0% |
| UOM | Each |
| Watersense Item | No |
| Watts | No |
| Weight | 0.400000 |
Write Your Own Review